APM
All alarm codes
ALARM 131

CUTTING FEED OVERRIDE ZERO

The cutting-feed override value is set to 0 on the machine operating panel.

Controls
Matrix, Matrix 2
Machine series
Quick Turn, Integrex, Slant Turn

Causes

  1. The cutting-feed override value is set to 0 on the machine operating panel.

How to clear it

  1. 1

    Change the cutting-feed override value to one greater than 0. If this alarm is displayed when the override is not 0, check the signal line for a short-circuit.

    • Mazatrol Matrix Alarm List, H740HA0030Emanual
      Change the cutting-feed override value to one greater than 0. If this alarm message is displayed when the cutting-feed override value is not 0, check the signal line for a short-circuit.

Confidence: high · Official Mazak Matrix manual.

First sourced: 5/21/2026

Related alarms

Same control or a nearby code on the same machine.