All alarm codes
ALARM 101
SOFT LIMIT
Some mistake in operations during the automatic operation has caused the tool tip to overstep the area specified in the software limit parameters in the dire...
- Controls
- Matrix, Matrix 2
- Machine series
- Quick Turn, Integrex, Slant Turn
Causes
Some mistake in operations during the automatic operation has caused the tool tip to overstep the area specified in the software limit parameters in the direction of the axis corresponding to the displayed axis name.
- Mazatrol Matrix Alarm List, H740HA0030Emanual
Some mistake in operations during the automatic operation has caused the tool tip to overstep the area specified in the software limit parameters in the direction of the axis corresponding to the displayed axis name.
- Mazatrol Matrix Alarm List, H740HA0030Emanual
How to clear it
- 1
Modify the program so that the tool tip may move within the area specified in the software limit parameters.
- Mazatrol Matrix Alarm List, H740HA0030Emanual
Modify the program so that the tool tip may move within the area specified in the software limit parameters.
- Mazatrol Matrix Alarm List, H740HA0030Emanual
Confidence: high · Official Mazak Matrix manual.
First sourced: 5/21/2026
Related alarms
Same control or a nearby code on the same machine.
- Alarm 113OVER TRAVEL (hardware limit)Matrix, Matrix 2
- Alarm 131CUTTING FEED OVERRIDE ZEROMatrix, Matrix 2
- Alarm 3EMERGENCY STOP (E-stop button pressed)Matrix, Matrix 2, T-32, Fusion 640T
- Alarm 35OVERLOAD (servo)Matrix, Matrix 2
- Alarm 52BATTERY ALARM (NC memory backup)Matrix, Matrix 2, T-32
- Alarm 53NC TEMPERATURE WARNINGMatrix, Matrix 2